070-642 TS: Windows Server 2008 Network Infrastructure, Configuring Certification Vorbei an den Praxisprüfungen ist es keineswegs schon schneller und einfacher, jetzt mit spezifischen Fragen und Antworten, mit aus den chaotisch Business Solutions, die sein oft falsch kann. grenzenlose Prüfungen sind nicht nur die weniger kostspielige Methode, sondern um mit sich Rückgriff auf Praxisprüfung passieren.

Alle unsere Online-Training Werkzeuge sind mit den wechselnden Prüfungszielen verfügbar, so dass Sie sicher sein, immer für Ihre Business Solutions mit den neuesten und origninalsten Praxisprüfungen vorzubereiten und unsere Business Solutions kann aktualisiert werden und Sie bekommen Werkzeuge zu günstigen Preisen für Ihren eigenen Komfort.

Schulungsunterlagen 070-642 Microsoft it-pruefungen

QUESTION 1
Your network contains two servers named Server1 and Server2 that run a Server Core
installation of Windows Server 2008 R2. Server1 has the SNMP Service installed. You need
to ensure that Server2 can send SNMP traps to Server1. What should you do?
A. On Server2, run dism /online /enable-feature /featurename:snmp-sc.
B. On Server1, run oclistsnmp-sc.
C. On Server2, run oclistsnmp-sc.
D. On Server1, run dism /online /enable-feature /featurename:snmp-sc.
Answer: A

QUESTION 2
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1
contains two shared folders named Share 1 and Share2. The shared folders are located on
the same volume.
You need to prevent users from storing more that 100 MB of data in Share1 only.
What should you install on Server1?
A. File Server Resource Manager (FSRM)
B. Network Policy Server (NPS)
C. Services for Network File System (NFS)
D. Windows System Resource Manager (WSRM)
Answer: A
Explanation/Reference:
Reference: http://technet.microsoft.com/en-us/library/cc733029.aspx

QUESTION 3
Your network contains four servers named Server1, Server2, Server3, and Server4 that run
Windows Server 2008 R2. The servers have the Network Policy Server (NPS) role service
installed.
You configure a Remote RADIUS Server Group named Group1. Group 1 contains Server2,
Server3, and Server4.
You need to configure load balancing for the members of Group1 to meet the following
requirements:
· Server1 must send 25 percent of all authentication requests to Server3.
· Server1 must send 75 percent of all authentication requests to Server2.
· Server1 must only send authentication requests to Server4 if Server2 and Server3 are
unavailable.
What should you do from the Network Policy Server console?
A. · For Server2, set the weight to 75 and the priority to 75, · For Server3, set the weight to 25 and
the priority to 25.
·For Server4, set the weight to 100 and the priority to 200.
B. · For Server2, set the weight to 75 and the priority to 1.
· For Server3, set the weight to 25 and the priority to 1.
· For Server4, set the weight to 100 and the priority to 100.
C. · For Server2, set the weight to 1 and the priority to 75.
· For Server3, set the weight to 1 and the priority to 25.
· For Server4, set the weight to 100 and the priority to 1.
D. · For Server2, set the weight to 75 and the priority to 25.
· For Server3, set the weight to 25 and the priority to 75.
· For Server4, set the weight to 100 and the priority to 1.
Answer: B
Explanation/Reference:
Reference: http://technet.microsoft.com/en-us/library/dd197433(WS.10).aspx
Schulungsunterlagen 070-642 Microsoft it-pruefungen